Best LCD Display for Arduinos

Everybody wants best features in products while spending money. However, it’s not easy to choose LCD Display for Arduinos when there are many options available in the market. But, you dont need to get confused because after a lot of research we listed LCD Display for Arduinos below. In case, if you’re in hurry this is the Best LCD Display for Arduinos on Amazon

Our team spent 29 hours to find out best options for you. In case if you’re confused which one you should buy, we have short listed best one below with all basic and advanced features you could ever expect in LCD Display for Arduinos.

Best LCD Display for Arduinos In September 2020

IMAGE PRODUCT STOCK PRICE
in stock
1 new from $23.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $15.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $15.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $37.99
1 used from $28.69
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $10.99
1 used from $9.60
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $18.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
2 new from $7.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $12.99
1 used from $10.70
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $8.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping
in stock
1 new from $31.99
as of August 11, 2020 12:32 pm
Amazon.com
Free shipping

Top LCD Display for Arduinos In The Market

Below, we wrote detailed review about top LCD Display for Arduinos so, please check out and make a wise choice.

PEMENOL 5PCS OLED Display Module 0.96 Inch I2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and Microcontroller - White Light


PEMENOL 5PCS OLED Display Module 0.96 Inch I2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and Microcontroller - White Light

 in stock
1 new from $23.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • 【CHANGEABLE IIC ADDRESS】: The built-in standard driver chip SSD 1306 already exists in the libraries of Arduino, Raspberry Pi and 51 Series,which makes programming very easy. This oled display can be used with different machine easily.
  • 【128 X 64 PIXELS】: With high resolution of 128 x 64 pixels, no need backlight, self-illumination, pixels stand outvery well even in a brighter circumstances like full sunlight.
  • 【COMPATIBLE WITH MANY CONTROL CHIPS】: This oled display can be widely use with 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily.
  • 【WIDE FIELD OF CLEAR VIEW】: 0.96inch OLED display module supports 180 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle.
  • 【EASY TO INSTALL】: With four square holes, our I2C OLED display module can be installed easily, truly convenient to use and simple you working.
You may also like to see review on Best Compact Dollies

DIYmall 0.96" Inch Blue and Yellow I2c IIC Serial 128x64 OLED LCD OLED LED Module for Arduino Display Raspberry PI 51 Msp420 Stim32 SCR Micro:bit(Pack of 2pcs)


DIYmall 0.96" Inch Blue and Yellow I2c IIC Serial 128x64 OLED LCD OLED LED Module for Arduino Display Raspberry PI 51 Msp420 Stim32 SCR Micro:bit(Pack of 2pcs)

 in stock
1 new from $15.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • The screen is made in Taiwan, quality is much better. Compatible with MMDVM,Pi-Star, and it works with raspberry pi. https://tech.scargill.net/ssd1306-with-python/
  • The IIC address can be changed,it is convenient to use with different machines; Four square holes are easy to install.
  • How to use 2pcs OLED display modules in the same time, pls check this vedio for reference: https://www.youtube.com/watch?v=yef23sJjiU0
  • Document link:https://drive.google.com/open?id=0B8DSGdAr8_31UEItMmx6ZDJIOWs Datasheet link:https://drive.google.com/open?id=16FdmMveOURZ_KeF_rOV_bWhavkiRB5WZ
  • What you will get is: 2 x 0.96inch oled blue&yellow,any question please feel free to contact us.
You may also like to see review on Best Digital Calipers

HiLetgo ESP32 LCD WiFi Kit ESP-32 1.14 Inch LCD Display WiFi+Bluetooth CP2104 USB Type-C Internet Development Board for Arduino ESP8266 NodeMCU


HiLetgo ESP32 LCD WiFi Kit ESP-32 1.14 Inch LCD Display WiFi+Bluetooth CP2104 USB Type-C Internet Development Board for Arduino ESP8266 NodeMCU

 in stock
1 new from $15.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • Chipset: ESPRESSIF-ESP32 240MHz Xtensa single-/dual-core 32-bit LX6 Microprocessor
  • FLASH: QSPI flash 4MB
  • SRAM: 520 kB SRAM
  • USB to TTL: CP2104
  • USB: Type-C
You may also like to see review on Best Human Skeleton Models

Nextion 3.5" Display NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 for Arduino Raspberry Pi


Nextion 3.5" Display NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 for Arduino Raspberry Pi

 in stock
1 new from $37.99
1 used from $28.69
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors. You can buy nextion enhanced 3.5 here, https://www.amazon.com/dp/B07916KQ76
  • You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board came with nextion. See image on how to use it.
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB.
  • You can buy most nextion display here, https://www.amazon.com/nextion
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
You may also like to see review on Best Cpr Mask for Pocket Or Key Chains

GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things


GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things

 in stock
1 new from $10.99
1 used from $9.60
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
  • Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
  • Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
  • With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
  • Wiki:http://wiki.52pi.com/index.php?title=1602_Serial_LCD_Module_Display_SKU:Z-0234
You may also like to see review on Best Otoscopes

4pcs I2C OLED 0.96 Inch OLED Display Module IIC SSD1306 128 64 LCD White with Du-pont Wire 40-Pin Female to Female for Arduino UNO R3 STM


4pcs I2C OLED 0.96 Inch OLED Display Module IIC SSD1306 128 64 LCD White with Du-pont Wire 40-Pin Female to Female for Arduino UNO R3 STM

 in stock
1 new from $18.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • Document link: https://drive.google.com/open?id=1qkexPET5MUICAarGOtlnQk4F-JEKkrHZ; New version: GND pins are arranged in the first place instead of VCC, and the pins are already soldered and do not need to be soldered by yourself! High quality, low price, 40pcs dupon wires are free.
  • I2c IIC Serial Oled LCD LED Blue Display Module: Interface: VCC: 3.3-5V; GND: Ground; SCL: Serial Clock; SDA: Serial Data; viewing angle: greater than 160 degrees; Working temperature: -30-80 degrees.
  • It is OLED display without backlight and it is low power dissipation.The thickness of galss is only 1.4mm. Color: White; Resolution: 128*64; Volume: 27 MM * 27 MM * 4.1 MM.
  • The IIC address can be changed, it is convenient to use with different machines. Driver IC: SSD1306; Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips.
  • 40pcs Du-pont Wires: 20cm/7.87 inch, 2.54mm 1p-1p pin head. The male ends meant for insertion into standard 0.1"(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1"(2.54mm) male headers. They can be used for PCB project, pc motherboard.
You may also like to see review on Best Instant Glue for Glasses

1602 LCD 2004 20x4 i2c LCD Display Adapter IIC//TWI/SPI/I2C Serial Interface Module Shield for Arduino UNO R3 MEGA2560 (2 Pcs


1602 LCD 2004 20x4 i2c LCD Display Adapter IIC//TWI/SPI/I2C Serial Interface Module Shield for Arduino UNO R3 MEGA2560 (2 Pcs

 in stock
2 new from $7.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • Handy device for I2C interfacing.If you have some 1602/2004 displays or similar and you don't want to have to use 6 to 12 pins on your Arduino or Raspberry Pi just to drive the display then these are just the ticket
  • An excellent improvement and conversion for older LCDs, and saves a lot of pins on the Arduino.The I2C interface is a huge improvement, freeing up a lot of pins on the Arduino for additional functionality and including the contrast control and backlight enable/disable
  • Compatible for 1602 LCD. Works fine with the 2004 LCD display as well. The I2C module can drive 2 and 4 line LCD displays for Arduino
  • This little I2C interface module works great and only two signal connections are required plus one each for power and ground.Good circuits to reduce the number of connections between your MCU and the LCD
  • If you already have a bunch of the 1602s but they use up a ridiculous number of pins on the Arduino, this LCD module really make interfacing to LCD text displays easy with an arduino. It saves from having to wire up and uses many gpio pins
You may also like to see review on Best Stethoscopes for Doctors

IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 4 Pin for Arduino for Raspberry Pi (Pack of 3pcs, Yellow-Blue-IIC)


IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 4 Pin for Arduino for Raspberry Pi (Pack of 3pcs, Yellow-Blue-IIC)

 in stock
1 new from $12.99
1 used from $10.70
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • 0.96" SSD1306 128X64 OLED LCD Display with IIC/I2C Interface-4PIN.
  • Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
  • Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!
  • The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
  • Tip: The blue and yellow areas are fixed and cannot be reset. The yellow area is the upper row, and the lower area is blue, as shown in the picture.
You may also like to see review on Best Blood Pressure Cuff for Emts

KEYESTUDIO 1602 LCD IIC/I2C/TWI Display 16x2 Character LCD Screen Module for Arduino Raspberry Pi


KEYESTUDIO 1602 LCD IIC/I2C/TWI Display 16x2 Character LCD Screen Module for Arduino Raspberry Pi

 in stock
1 new from $8.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • Bright and clear display- white texts on Blue backlight, adjustable contrast
  • Built with IIC/I2C interface to save 5 IO ports(the original 1602 LCD needs 7 IO ports to be up and running)
  • Plug and play; Easy to use with Arduino Liquid Crystal Library; Easy to connect to a Raspberry Pi
  • LCD I602 has 4 pins. SCL should be connected to analog 5, SDA to analog 4, VCC to +5V and GND to ground
  • How to use: Search for "keyestudio wiki KS0061" in Google Chrome to get the wiki online tutorial for this product.
You may also like to see review on Best American Standard Wifi Thermostats

Nextion 3.2 inch Display NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 for Arduino Raspberry Pi ESP8266


Nextion 3.2 inch Display NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 for Arduino Raspberry Pi ESP8266

 in stock
1 new from $31.99
Free shipping
Check on Amazon
Amazon.com
as of August 11, 2020 12:32 pm

Features

  • NX4024T032 is nextion 3.2 basic screen: 3.2 inch TFT, 400x240 resistive touch display, 4M flash, 2K Byte RAM, 65k colors. You can buy nextion enhanced 3.2 here, https://www.amazon.com/dp/B0853543HB
  • You can power nextion 3.2 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board came with nextion. See image on how to use it.
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB.
  • You can buy most nextion display here, https://www.amazon.com/nextion
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
You may also like to see review on Best Compartment Stainless Steel Sinks

Conclusion

So, this is our review on Best LCD Display for Arduinos to help you out. For more product reviews check out below or visit here.